SABINE GRAPHI-Q2 Specifications download pdf (Page 11)

5.3. USE WITH A POWERED MIXER

With a powered mixer, the Graphi-Q2 must be inserted between the “Line Out” jack(s) (line level output,

before the signal goes through the amplifier) and the “Amplifier In” jack(s), as shown below:

NOTE: Not all powered mixers will offer such patch points, or they may label them differently. When

in doubt consult the manual of the console manufacturer.

5.4. USE AT A MIXER INSERT POINT

The Graphi-Q2 may also be used at a mixer insert point, either for a single input channel, or for a group

or bus insert point. This will dedicate all of the features and processing power of the Graphi-Q2 to one

or two single channels on your mixer, or to a su/jointfilesconvert/363112/bgroup of inputs (for example, all the drums in your mix).

The patching will look like this:

SECTION FIVE: INSTALLATION

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 57 58

No comments

SABINE GRAPHI-Q2 Specifications Page 11