SABINE GRAPHI-Q2 Specifications download pdf (Page 39)

SECTION EIGHT: USING GRQ2 REMOTE SOFTWARE

8.8.5. Passwords For Multiple Units

In a multiple unit serial chain, any PASSWORDS saved will apply to the first unit, and will be copied to

all units downstream in the serial chain. Any units that are separated from the serial chain in place at

the time of saving passwords, will retain the same passwords in a new setup. If units with previously

designated passwords are subsequently joined in a serial chain, only the password for the first unit will

be required to access the entire network. If passwords are changed, the changes will be automatically

copied to all units in the network. If passwords are NOT changed, and units are subsequently separated

into new configurations, each will retain its original password.

8.9. NAVIGATING WITH MULTIPLE UNITS

SWITCHING CONTROL FROM ONE UNIT TO ANOTHER. This can be accomplished with either the

pulldown menu, “Select Graphi-Q,” or by the keyboard shortcut Control/A= unit #1, Control/B=unit #2,

etc. The unit currently under control will be displayed in the center top of the Curve Display on the main

screen. You may switch from controlling one unit to another with the Control key shortcut, no matter

what screen (main or parameter screen) you are currently working in. This allows quick adjustments

of the same parameters across all units in your serial chain.

8.10. UPGRADING GRAPHI-Q2 FIRMWARE & SOFTWARE

One more great feature of the Graphi-Q2 is its easy upgradability. Each units firmware (think of it as the

operating system) is stored in on-board FLASH RAM, which means you can upgrade the system by

loading in the latest firmware. In addition, you may download upgrades to the Remote Control software

for the Graphi-Q2.

You can determine your Graphi-Q2’s current firmware version by one of two methods:

1. For front panel models (GRQ3121 or GRQ3122), the firmware version will flash briefly in the digital

delay display immediately following power-up of your unit.

2. For all models, the current firmware version will be stated in the "About" screen of the Remote

Control software (unit connected and powered up).

NOTE: If you have a slave unit (GRQ3121-S or GRQ3122-S) that will not connect to a computer for remote

control, and you are not certain of the unit’s firmware version, contact the Sabine factory with the serial

number of the unit. We can tell you the firmware contained when it left the factory.

When upgrading your Graphi-Q2’s software or firmware, make sure you are upgrading to the latest

released version of each. As new features develop and upgrades are made, we will post these on our

website and make them available for downloading.

8.10.1. How to Upgrade Your Firmware

The Sabine Upgrade Wizard is a program that is automatically installed when you install your GRQ2

Remote software. You can install it manually on your computer by running the

setup.exe

file in the

Upgrade Wizard directory. Alternatively, you may download the latest Upgrade Wizard program from the

Sabine website (www.Sabine.com). The program will place an icon on your desktop called “Upgrader.”

The program contains complete step-by-step instructions to upgrade both your Graphi-Q2 firmware and

software. Follow these on-screen instructions. Note that for firmware upgrades there are two basic steps.

One is downloading the firmware using your Internet connection, and the other is connecting your

computer and uploading (flash) the firmware into the Graphi-Q2. These two steps can be done

independently, allowing you to flash the units without being connected to the Internet.

IMPORTANT

Recalibrate the

Front Panel

Controls after

Upgrading

Firmware

(see Section 6.1)

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 57 58

Comments to this Manuals

No comments

SABINE GRAPHI-Q2 Specifications Page 39

Comments to this Manuals

Related products and manuals for Cars SABINE GRAPHI-Q2