SABINE GRAPHI-Q2 Specifications download pdf (Page 34)

B2-GRQ-2-OpGuide-v1-060519.pmd

SECTION EIGHT: USING GRQ REMOTE SOFTWARE

command execution for a large network of Graphi-Qs for units near the end of the chain. Most of this delay

is a reporting delay; the command will be

executed quickly, but the computer screen

indication of the implemented change may

take up to a few seconds. Speed is

dependent on several factors:

1. How “busy” each Graphi-Q is. Elimi-

nating feedback, for example, is very

processor-intensive and will delay

speed.

2. The number of units in your serial

network. The bigger the network, the

longer the delay.

3. The nature of the parameter under

control. Digital delay, for example, is

slower to respond than the near-in-

stantaneous response to graphic EQ change.

8.4. RESET PARAMETERS

You may use the Sabine Remote Software to reset all parameters, or a particular set of parameters. To

access the Reset Parameters, press F12 Function Key, or select Reset Parameters from the Options

Menu at the top of the main remote screen. The screen at right will appear:

Use your mouse to click on the settings you wish to reset, or the “ALL” choice if you want to reset

everything. For two channel Graphi-Qs, you may reset settings for individual channels. For single

channel Graphi-Qs, you may reset OUTPUT LEVEL and DIGITAL DELAY settings for the two different

outputs possible with these units; all other parameter settings are common to both outputs and will be

reset for both.

NOTE: Compressor output settings are NOT reset when the compressor /limiter parameters are

reset. Output levels control the output gain of the Graphi-Q and must be reset separately.

NOTE: If you want to compare your settings to the Graphi-Q default condition (all settings zero), the

best way to do this is to save your current setting to a Preset, then change between that Preset and

Preset #0 (default).

8.5. PRINTING GRAPHI-Q2 SETTINGS FOR DOCUMENTATION

All settings loaded into a Graphi-Q2’s memory may be printed out for ease of documentation, by simply

selecting PRINT from the FILE menu at the top of the Remote Control main screen. Print one set of

parameters for each GRQ2 in a linked chain. Printing can be done in Remote Control or Demo modes.

In addition to printing a record of parameter settings for an individual Graphi-Q2, you may elect to print

a record of how controls are linked for a multiple-unit Graphi-Q2 system. Simply select “PRINT” from

within the link table.

If you are out in the field and not attached to a printer, you can use the Off-Line Edit/Demo mode to print

your parameter and link-table files when you get back to the office. Graphi-Q parameter files can be sent

via e-mail as well.

8.6. STORING AND RECALLING GRQ2 PRESETS

8.6.1. Memory Storage and Recall Options

You may store and recall all settings of the Graphi-Q2, either within the Graphi-Q2 memory itself, or as

an external file.

8.6.1.1. Storage within the Graphi-Q2 memory

There are two methods of storing memories inside the Graphi-Q2 itself:

1. Using “Snapshot” memory storage. You may save and recall (load) up to three Snapshots of Graphi-

Q settings. Select Snapshot 1, 2, or 3 from the Options Menu, or use the keyboard shortcuts Shift/

F1, Shift/F2, and Shift/F3. To recall Snapshots, select from the Options Menu, or use keyboard

shortcuts Ctrl/F1, Ctrl/F2, and Ctrl/F3.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 57 58

Comments to this Manuals

No comments

SABINE GRAPHI-Q2 Specifications Page 34

Comments to this Manuals

Related products and manuals for Cars SABINE GRAPHI-Q2