SABINE GRAPHI-Q2 Specifications download pdf (Page 50)

B2-GRQ-2-OpGuide-v1-060519.pmd

Limit Limit sets an absolute output gain level. Peak input signals rising above the

threshold value set with this parameter will be compressed so extremely as to

reflect no additional gain at the output stage. Note that the Limit threshold and

the compressor threshold (Thresh) can be set independently, allowing both a

mild degree of compression and brick wall peak limiting. All other parameters

besides Thresh and Ratio are common for both the compressor and limiter.

Attack Attack sets the speed with which the signal is compressed once the gain

exceeds the threshold. Attack is generally set to a very quick response and

can be varied from 1 to 99 msec.

Release Release sets the speed with which the output signal returns to unity gain when

the input signal falls below the threshold. It can be varied from 50 milliseconds

to 5 seconds.

The compressor window also displays metering of the input signal (both channels) and the compression

added to the signal (both channels). When compression is engaged, the meters will work in opposite

directions.

Compressor/limiter functions on the GRQ3102 and GRQ3102-S models can be adjusted individually

for channels A and B using Graphi-Q Remote Control software.

SECTION NINE: SUGGESTIONS FOR OPTIMAL USE OF THE GRAPHI-Q2

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 56 57 58

No comments

SABINE GRAPHI-Q2 Specifications Page 50